Canon 800 - Manual (Page 39)

– 37 –
6 Press the brightness adjustment key ( ) to display the
minutes and then use the plus (+) and minus (-) keys to
set the minutes.
Display Setting
~ 0 to 60 minutes
7 Press the brightness adjustment key ( ) to display the
seconds and then use the plus (+) and minus (-) keys to
set the seconds.
Display Setting
~ 0 to 60 seconds
8 When you have finished all the date and time settings,
press the Start key to complete the setting procedure.
● Checking the Date and Time
1 When you press the Clear key and the Negative/Positive
key, the display changes to show the date and time in
the following sequence: Year ➜ Month ➜ Day ➜ Hour
➜ Minutes ➜ Seconds.
NOTE
The position of the brightness indicator lamp identi-
fies the date/time setting. If the scanner is set to
Scanner mode, the date and time set internally in the
scanner is reset to match the settings in the connected
computer.
Year
Month
Day
Hour
Minutes
Seconds.