Canon 800 - Manual (Page 16)

– 14 –
Preparing the Carrier
The list below shows all the optional film carriers that can
be installed on the Canon Microfilm Scanner 800. For
more details about these optional carriers, consult your
Canon dealer or authorized Canon service outlet. For
information on carrier installation and operation, refer to
the instructions provided with the carrier.
Note
The Auto Carrier 100C, 100M and 100R and the FS
Controller I and Roll/Fiche Carrier 200 require the
optional installation kit.
Fiche Carrier 190R II
A film carrier for viewing microfiche (up to 105 x 190
mm), jackets and aperture cards.
Auto Carrier 100C (AC100C)
A motorized automatic carrier for 16 mm cartridge film
(ANSI, ANSI ENCLOSED *1, Kodak Ektamate or 3M)
that features high-speed automatic loading and rapid film
feeding and display.
Auto Carrier 100M (AC100M)
A motorized automatic carrier for 3M cartridges or
TUSCAN M-type *2 cartridges that features high-speed
automatic loading and rapid film feeding and display.
Auto Carrier 100R (AC100R)
A motorized automatic carrier for 16 or 35 mm film wound
on standard open reels.
FS Controller I
A motorized automatic carrier for 16 mm cartridge film
(ANSI, Kodak Ektamate or 3M). This carrier is required
for reading film marked with blips for image search and
retrieval.
FS Controller III
A motorized automatic carrier for the latest 16 mm car-
tridge film (ANSI, Kodak Ektamate or 3M). This carrier is
required for reading film marked with blips for image
search and retrieval.
Roll/Fiche Carrier 200
This carrier is required for reading 16 or 35 mm standard
open reel film, 16 mm cartridge film (ANSI, Kodak
Ektamate or 3M), microfiche (up to 105 x 190 mm),
jackets or aperture cards.
*1 ANSI ENCLOSED cartridges are as stipulated in ANSI MS-15.
*2 TUSCAN M-type refers to TUSCAN cartridges with a 3M-type core.
Before You Begin...