Carl Goldberg GBGA1091 - Manual (Page 4)

2.
Bolt the landing gear in place using the two 6-
32 bolts and flat washers. Be sure to use lock-
tite on the bolts. The blind nuts are pre-
installed..
4
1.
COLLECT THE FOLLOWING ITEMS
(1) ALUMINUM LANDING GEAR
(2) 5/32” AXES
(2) AXLE NUTS
(2) WHEEL COLLARS
(2) 6-32 X 1” BOLTS
(2) 2-1/2” WHEELS
(2) FLAT WASHERS
Fuselage Assembly
2.
Locate the holes in the bottom of the fuselage
just ahead of the wing opening. Remove cov-
ering with an x-acto knife or soldering iron.
3.
Mount the wheel on the axle using the 5\32”
wheel collar.