Costar CDC2500MI - Manual (Page 8)

7
1.2 Features and Functions
• Multi-language on screen menu for operation and function settings.
• On screen Camera title with exact x/y coordinates. (The camera title is user definable as well as
the ability to display or not the camera coordinates)
• On screen Crosshair function (By enabling this option, the target can be followed more
effectively using the crosshairs as a reference point).
• Three user definable PTZ tours with up to 2 minutes record duration for each tour. ᧤User has
the ability in real-time to monitor and record the action of a manual dome operation) The 3 tours
consisting of preset, pattern, and auto scan functions, can be programmed with a multitude of
functions and preset locations. While moving, each preset scan can be watched in smooth vector
scan mode.
• 5. Six group of programmable vector scans (including scan speed, dwell time, preset and dwell
time between tours)
• Auto flip function with + 10 degree positioning
• Eight sectors of user programmable privacy zones (sectional mask). User can mask part of the
camera sectors which differs between different models of installed cameras.
• Eight sectors of user programmable sectional display. User can define and display the name and
position of the camera, which differs between different models of installed cameras.
• Resume automatic operation after initial self-test of the dome as well as resume automatic
operation when there is no transmission from a keyboard controller. (Dwell time can be set from
1 to 999 seconds)
• Freeze frame function.
• Resume operation function. (Dome unit will return to the previous operation after the execution
of an operation using the on screen menu)
• Intelligent manual scan function. ᧤By executing this function in manual pan operation, you can
adjust the manual pan behavior of the dome ᧥
• 13. Intelligent power off real time memory. ᧤Should power fail while the dome was in operation ,
the dome will resume its preprogrammed function upon power restore)
•
Highly efficient 3-dimensional scan function.
•
Zoom and dome speed correlation function. (When the camera is zoomed in close, the dome
speed is reduced to allow for precise operation control)