Costar CDC2500MI - Manual (Page 23)

22
5.2 Tree Menu List.
1.All sub-menus can be seen clearly in this tree list.
5.2.1.
Language English << Depending Country of sale different options available
5.2.2. Display options << Display options
1. PreShot setup << Preset position setup options
1. Numder 001 << Preset number selection
<< The default number is 001. Move the joystick left or right to
move the cursor under the desired numeral position and press
OPEN to move the cursor on the second numeral line (0~9).
Move the Joystick left or right again under the desired numeral
position and press
OPEN to select the desired number (0~9).
Press OPEN again to confirm the selection.
<< Press CLOSE to finalize your selection and return to the
previous menu level.
2. Set Preshot <
(P,T,Z) and then press CLOSE to confirm the preset position
location and return to the previous menu level.
3.
Call Preshot <
Based on the displayed/selected preset position on line 1 of this
menu, the dome will respond upon moving the joystick to the
Right position and move to the corresponding coordinates of
the selected preset position.
4. Delete preshot <
<
Press OPEN to confirm
Press
CLOSE to exit and return to the previous menu level.
5. Name _ _ _ _ _ _ _ _ <
1~165
001
0 1 2 3 4 5 6 7 8 9
IRIS CLOSE When Done
Call 001
Are you sure to do this?
IRIS OPEN to Confirm
IRIS CLOSE to Cancel
_ _ _ _ _ _ _ _
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z _
IRIS CLOSE When Done
<< Joystick Left or Right when programming to
select preset and press OPEN to confirm.
Joystick Left or Right to select (0~~9 or A~~Z).
Press
OPEN to confirm selection.
Press CLOSE to exit or return to the previous
menu level when programming is done.
IRIS CLOSE When Done