Costar CDC2500MI - Manual (Page 28)

27
5.2.6. Function Programming
<< Special function Press OPEN or Joystick Left or Right to enter
1. PTZ Tour (Pattern) << Tour programming Press OPEN or Joystick Left or Right to enter
1. Number ( 1 ~~ 3 ) << PTZ tour number Joystick Left or Right to select
2. Name _ _ _ _ _ _ _ _ << Edit PTZ name Press OPEN or Joystick Left or Right to enter
3. Program a Tour < Press OPEN or Joystick Left or Right to enter
4.
Run a Tour < Press OPEN or Joystick Left or Right to enter
5.
Delete a Tour < Press OPEN or Joystick Left or Right to enter
6.
Name Display ON/OFF < Joystick Left or Right to select
IRIS CLOSE to Exit
2. Program Vector Scan << Program vector scan.
Press OPEN or Joystick Left or Right to enter
1. Number ( 1 ~~ 6 ) < Joystick Left or Right to select
2. Program a Vector scan < Press OPEN or Joystick Left or Right to enter
_ _ _ _ _ _ _ _
0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N
O P Q R S T U V W X Y Z _
IRIS CLOSE When Done
IRIS OPEN to Begin
IRIS CLOSE to Exit
Call out
Are you sure to do this?
IRIS OPEN to Confirm
IRIS CLOSE to Cancel
<< Joystick left or right when programming to
select preshot and press OPEN to confirm.
Joystick left or right to select (0~~9 or A~~Z).
Press
OPEN to confirm selection.
Press CLOSE to exit or return to previous
level menu when programming is done.
<<
<< Reminder: are you sure to do this.Press OPEN to confirm.
Press CLOSE to exit and return to upper stage menu.
Name Num V Dwell
1 _ _ _ _
2 _ _ _ _
3 _ _ _ _
16
IRIS CLOSE When Done
<cursor, and stop the cursor at place
of programming. Press
OPEN to
enter the selection.