Blinds Chalet Good Housekeeping 2 Wood Blinds - Manual (Page 10)

10
STEP 5: OPERATING THE BLIND
Please refer to the ordered control system options below for instructions on how to
properly operate your blind.
STANDARD RECTANGULAR BLINDS:
TO TILT THE SLATS:
ƒ
Pull on one of two tilt cords to rotate slats forwards or backwards.
ƒ Rotate the wand tilter (if ordered) to rotate slats forwards and backwards.
TO RAISE AND LOWER THE BLIND:
ƒ
Tilt the slats to the open position (flat and parallel to headrail).
ƒ Pull the single lift cord down and toward the center of the blind.
ƒ Raise or lower blind to desired position, then...
ƒ Move the cord toward the outside of the blind to lock, then release.
CORDLESS LIFT BLINDS:
TO TILT THE SLATS:
ƒ
Pull on one of two tilt cords to rotate slats forwards or backwards.
ƒ Rotate the wand tilter (if ordered) to rotate slats forwards and backwards.
TO RAISE AND LOWER THE BLIND:
ƒ
Tilt the slats to the open position (flat and parallel to headrail).
ƒ Hold the center portion of the bottom rail to ensure level movement.
ƒ Lower the blind by gently pulling downward to the desired position.
ƒ Raise the blind by gently pushing upward to the desired position.