AvMap EKP V User Manual - Manual (Page 12)

Aeronautical Navigator AvMap EKPV
12 - Quick Manual
Aeronautical Navigator AvMap EKPV
Quick Manual - 13
or move the joystick to enable the cursor
under the current fix position.
Auto Zoom
The Auto Zoom mode is used to keep the
fix position and destination (Target) visible
on the map.
The map is scrolled and zoomed
automatically to keep the best view possible.
When this mode is active the cursor is
hidden. To activate Auto Zoom mode press
‘ESC’ in Moving Map. Auto Zoom requires a
position fix and an active destination point. If
a destination point is not present it works as
Auto Home mode. To deactivate Auto Zoom
mode press ‘ESC’ activating the cursor at
the previous cursor position or press the
key to enable the cursor under the current
fix position.
Map Layout :
In this section it is possible to configure the
layout of the map page. EKP V gives the
possibility to customize in detail the content
of each data field and its position. Moreover,
it is possible to select and display data fields
both in the vertical and in the horizontal bar.
Select Layout Configuration to modify the
layout of the map page.
There are 3 sections to configure, selecting
each of them on the selecting bar on top of
the menu page:
Vertical Profile (VP)
Permits to show or to hide the Vertical
Profile during navigation.
HSI window
Permits to show or to hide the HSI
window.