Avlink PG-Y1 - Manual (Page 9)

8
Chapter 3 Operation
)
1. After pressing the power On/Off key for 2~3 seconds
to sound a long “beep”.
2. Only for the valid key of PG-Y1 will sound a short
confirmed “beep” after pressing the key.
3. The chosen option will blink.
4. After you changing the values, remember to press
“Enter” indicated key to take the changed values
effectively.
3.1 Starting Status
After you pressing the Power key to power on the PG-Y1,
the LCD screen will show you the PG-Y1 version suddenly
then show you the main screen as below (or previous
setting values saved in the PG-Y1’s memory):
P11 720x480i @29
„
P11: Pattern 11 (refer to Appendix B: Pattern chart)
„
720x480i: Resolution is 720X480i
„
@29: Refresh rate is 29Hz
„
95%: OVERSCAN ( dump percentage 0~10%).
„
“ ”: The power of battery is charging.
.