ALTANA Mechanical Cupping Tester - Manual (Page 4)

5
English
Information
1. Warning
• The instrument must be securely positioned
and fastened onto a level bench or table
capable of supporting its weight.
DO NOT:
• use the instrument near water
• clean the instrument with solvents (apart
from the indenter and clamping system)
• open the case. There are no user serviceable
parts inside
• attempt to lift the instrument by the handles
or panel clamping mechanism
• expose to; excessive heat or humidity,
aggressive and/or solvent and/or corrosive
substances, flammable substances, excessive
vibration
Defects and Extreme Usage
If safe operation can no longer be presumed,
shut down the unit and secure it against
unintended operation. The unit must be
presumed unsafe to operate if;
• It shows visible damage
• It no longer operates
• It has been stored for long periods under
adverse conditions
• It has received harsh treatment during
*This instrument complies with standard EN61010-1 2001 Safety
requirements for electrical equipment for measurement, control
and laboratory use
!