ALTANA Resource I Mechanical Drive - Manual (Page 6)

5
have been identifi ed recetitive samples
can be produced.
F. The speed of carriage travel is a variable which
is easily controlled by using the knob located on
the top rear of the device. For consistent sample
reproduction this speed cotrol setting should be
established when running tests.
G. To remove the test card and wire rod, reverse
the operations outlined in sections B and D. It
is a good housekeeping practice to immediately
remove any residue and clean the wire rod and
table top.
Refer any questions or operating diffi culties to:
BYK-Gardner USA RiversPark II 9104 Guilford
Road Columbia, MD 21046 Tele: 1-800-343-7721
Operation