ALTANA LCM plus - Manual (Page 17)

BYK-Gardner GmbH LCM plus 235 017 133 DE 0302
46
C8.3 Instrument check
LCM plus can be checked with a certified test solution set addista ® -color in compliance with ISO
9000ff.
D Technical Notes
D1 Error Messages
The following display messages indicate errors of operator or instrument.
Result outside the measuring range.
There is a cuvette left in the cuvette compartment.
Put new reel of paper into LD 500.
The lamp is probably broken.
Exchange it as described in chapter D3.
If one of these error messages appears, please check whether e.g. the printer is connected
properly, calibration is correct and the sample cuvette at its place. If you still cannot eliminate the
error, contact our service department or field service.
***
Please remove
cuvette!
Insert paper
Error!
Calibration
No Signal
Lamp ?