AERCO Modbus Communications Manual for ECS - Manual (Page 9)

5
5. Page to the cmS list
6. Scroll to the Addr screen
7. Use the Up Arrow to select
the desired address number.
8. Go to the home screen by
pressing the Page and
Scroll
buttons at the same
time.
9. Page to the ACCS List and
change the code to anything
other than 24 and the codE
number you entered will
flash off and then on to 0 to
confirm that access is now
set to the OPEr level and is
safe to return to use.
10.Confirm that the Addr is set
properly by pressing Page button
until the cmS list is displayed and
Scroll
to Addr. If the value is
correct you are done, if not
please repeat the steps again.