AERCO Belimo AF120-S US Actuator - Manual (Page 6)

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
60
KH-AF non-direct mounting with ZG-108 mounting bracket
KH-AF (-1) crank arm
ith KH-AFV V-bolt kit with KH
nk arm KH-8 cran
Multiple dampers direct coupled to one actuator with linkage to
operate the other damper.
Installation Instructions
Non-Direct Mounting Methods
KH AF C k KH-AF Crank arm
Including Retaining Ring
CAUTION: The retaining clip supplied with the clamp is : not F used to mount the KH-AF t
crank arm.
The KH-AF (-1) crank arm is used in non-direct coupled mounting applications. The
KH-AF (-1) may also be used to simultaneously direct couple to a damper shaft and
provide an additional crank arm connection to a second damper. The KH-AFV V-bolt
kit must be used for this non-direct application (see illustration this page).
TWO SIZES ARE AVAILABLE:
KH-AF For round shafts up to 3/4” or square shafts up to 5/8”
KH-AF-1 For jackshafts up to 1.05”
KH-AFV V-bolt kit for KH-AF(-1) crank arm
Note: KH-AF (-1) crank arms cannot be used on AF Series 1 actuators.
Dimensions (Inches [mm])
KH-AF
(-1
) dim sca
n
M40024 - 05/10 - Subject to change.
© Belimo
Aircontrols (USA),
Inc.