beautypg.com

Cooling system – Acura 2000 RL - Owner's Manual User Manual

Page 227

background image

Cooling System

12.Install the engine cover. First

tighten the two bolts on the front
of the engine cover, then tighten
the three nuts on the engine cover.

Tightening torque:

7 lbf.ft (10 N.m,1.0 kgf.m)

13.Install the radiator cap, and

tighten it to the first stop.

14.Start the engine and let it run until

the radiator cooling fan comes on
at least twice. Then stop the
engine.

15.Remove the radiator cap. Pour

coolant into the radiator up to the
base of the filler neck and into the
reserve tank up to the MAX mark.

16.Start the engine and hold it at

1,500 rpm until the cooling fan

comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.

17.Install the radiator cap, and

tighten it fully.

18. If necessary, fill the reserve tank

to the MAX mark. Install the
reserve tank cap.

Maintenance

RESERVE TANK

Main Menu

Main Menu

Table of Contents