beautypg.com

Cooling system – Acura 2000 RL - Owner's Manual User Manual

Page 224

background image

Cooling System

Replacing Engine Coolant

The cooling system should be

completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
Genuine Honda Antifreeze/Coolant.

Draining the coolant requires access
to the underside of the car. Unless

you have the tools and knowledge,
you should have this maintenance

done by a skilled mechanic.

1. Turn the ignition ON (II). Turn

the heater temperature control
dial to maximum heat (climate
control to 90°F/32°C). Turn off
the ignition. Open the hood. Make
sure the engine and radiator are
cool to the touch.

2. Remove the radiator cap.

DRAIN PLUG

3. Loosen the drain plug on the

bottom of the radiator. The
coolant will come out through the
hole in the splash cover.

CONTINUED

Maintenance

Main Menu

Main Menu

Table of Contents