Acura 2000 RL - Owner's Manual User Manual

Page 104

Driving Position Memory System

Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.

Not pressing a memory button

within 5 seconds.

Readjusting the seat or steering
position.

Readjusting the outside mirror
position.

Each memory button stores only one
driving position. Storing a new
position erases the previous setting

stored in that button's memory. If

you want to add a new position while
retaining the current one, use the

other memory button.

All stored driving positions will be

lost if your car's battery goes dead or
is disconnected.

Selecting a Memorized Position

You can select memorized positions

as follows.

1. Make sure the parking brake is set

and the shift lever is in Park.

2. Insert the key in the ignition

switch. If you do not insert the key
in the ignition switch, the steering

wheel will not adjust to the
memorized position until you do.

3. Press the desired memory button

(1 or 2) until you hear a beep, then

release the button.

The system will move the seat,

steering wheel and outside mirrors

to the memorized positions. The
indicator light in the selected
memory button will flash during
movement. When the adjustments
are complete, you will hear two
beeps and the indicator light will
remain on.

CONTINUED

Instruments and Controls

MEMORY BUTTONS

Main Menu

Table of Contents