Acura 2000 RL - Owner's Manual - Manual (Page 193)

Vehicle Stability Assist (VSA) System
VSA System Indicator
The VSA system indicator (see page
56 ) comes on and stays on when
there is a problem with the VSA
system.
If the VSA indicator comes on while
driving, pull to the side of the road
when it is safe and turn off the
engine. Reset the system by
restarting the engine, and watch the
VSA system indicator. If the
indicator remains on, or comes back
on while driving, have the VSA
system inspected by your Acura
dealer.
If the indicator does not come on
when the ignition switch is turned
ON (II), there may be a problem
with the VSA system. Have your
dealer inspect your car as soon as
possible.
Without VSA, your car will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.
VSA Off Switch
This switch is under the left vent.
Press it to turn the Vehicle Stability
Assist system on and off.
When VSA is off, the VSA Activation
Indicator light comes on as a
reminder. Pressing the switch again
turns the system back on.
Driving
VSA SYSTEM INDICATOR
Main Menu
Main Menu Table of Contents