Acura 2000 RL - Owner's Manual - Manual (Page 112)

Digital Clock
To set the clock:
1. Turn the ignition switch ON (II) to
display the time.
2. Swing down the front cover of the
wide button to the right of the
clock display. You will see HOUR,
MIN., and RESET buttons.
3. Press and hold the HOUR button
until the hour advances to the
desired hour.
4. Press and hold the M I N . button
until the numbers advance to the
desired time.
You can use the RESET button to
quickly set the time to the nearest
hour. If the displayed time is before
the half hour, pressing RESET
button sets the clock back to the
previous hour. If the displayed time
is after the half hour, pressing the
RESET button sets the clock for-
ward to the beginning of the next
hour.
For example:
1:06 would RESET to 1:00.
1:52 would RESET to 2:00.
Instruments and Controls
HOUR MIN. RESET
Main Menu
Main Menu Table of Contents