Acura 2008 MDX - Owner's Manual - Manual (Page 73)

If the indicator blinks while driving,
it indicates the differential
temperature is too high.
TEMP. HIGH’’ message on the
multi-information display (see page
).
Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If this indicator comes on at
any other time, there is a problem in
display (see page ). Take your
For more information, see page .
This indicator comes on when there
is a system message on the multi-
information display. Press the INFO
button on the steering wheel (see
page ) to see the message (see
page ).
Most of the time, this indicator
comes on along with other indicators
in the instrument panel such as the
seat belt reminder indicator, SRS
indicator, VSA system indicator, etc.
81
73
82
82
348
Instrument Panel Indicators
Super Handling-All
Indicator
Message Indicator
Inst
ru
m
ent
s
and
Cont
ro
ls
69
damage to the system.
vehicle to a dealer to have it checked.
indicator blinking may cause serious
message on the multi-information
Wheel Drive (SH-AWD ® )
® the SH-AWD system. You will also
see a ‘‘CHECK SH-AWD ® SYSTEM’’
You will also see a ‘‘SH-AWD ® DIFF
Continuing to drive with the SH-AWD ®
2008 MDX
Table Of Contents Main Menu