beautypg.com

Changing a flat tire – Acura 2008 MDX - Owner's Manual User Manual

Page 434

background image

Slowly turn the wheel nut wrench

clockwise to take up the slack of

the hoist cable. Make sure the

bracket is seated in the center

hole of the flat tire.

Turn the wheel nut wrench

clockwise until the flat tire rests

against the underbody of the

vehicle and you hear the hoist

click.

Store the jack in its holder. Turn

the jack’s end bracket to lock it in

place. Store the tools, and install

the cover.

Refer to

(see page

).

22.

23.

25.

24.

355

Changing a Flat Tire

Changing a Tire with

TPMS

430

WHEEL NUT WRENCH

Loose items can fly around the
interior in a crash and could
seriously injure the occupants.

Store the wheel, jack, and tools
securely before driving.

Always raise the spare tire hoist, even
if you are not stowing a tire. If the
hoist is lef t down, it will be damaged
during driving and need to be replaced.

2008 MDX

Table Of Contents

Main Menu