beautypg.com

Installing a child seat – Acura 2008 MDX - Owner's Manual User Manual

Page 53

background image

Attach the tether strap hook to the

tether anchor, then tighten the

strap as instructed by the child

seat maker.

To install a LATCH-compatible child

seat in the center seating position on

the second row seat, use the center

lower anchors as shown above.

Follow step 1 through 4 as

described previously to secure the

child seat.

Lower the head restraint first.

Route the tether strap over the

head restraint and seat-back, then

attach the tether strap hook to the

anchor, making sure the strap is

not twisted.

Push and pull the child seat

forward and from side-to-side to

verify that it is secure.

Pull up the cover below the

armrest and find one of the

anchors. The other anchor is

located underneath the flap at the

bottom of the outer seat’s inner

bolster.

Push and pull the child seat

forward and from side-to-side to

verify that it is secure.

6.

7.

2.

3.

4.

1.

Using the Center LATCH

Installing a Child Seat

Dr

iv

er

and

P

asseng

er

Saf
et

y

49

2008 MDX

Table Of Contents

Main Menu