beautypg.com

Lights – Acura 2008 MDX - Owner's Manual User Manual

Page 411

background image

CONTINUED

Remove the socket by turning it

one-quarter turn counterclockwise.

Pull the bulb straight out of its

socket.

Push the new bulb straight into

the socket until it bottoms.

Turn on the lights to make sure

the new bulb is working.

Put the socket back into the light

assembly, and turn it clockwise to

lock it in place.

Install the rear light assembly in

the rear pillar. Tighten the two

bolts. Snap the bolt covers into

position.

Open the tailgate. Place a cloth on

the edge of the light assembly

cover. Remove the cover by

carefully prying in the notch on its

middle edge with a flat-tip

screwdriver.

1.

4.

5.

6.

7.

8.

9.

Lights

Replacing a Back-up Light Bulb

Ma
int
ena

nce

407

COVER

BULB

SOCKET

2008 MDX

Table Of Contents

Main Menu