Kofax Communication Server 9.2.0 - Manual (Page 180)

Client Applications Administrator‘s Manual Version 9.02.00
©Kofax, Inc. 180/203
19.5 Configuration
For this feature to work properly you need to make some configuration settings.
19.5.1 TCOSS Configuration
For detailed information about telex line configuration refer to the TCOSS system manual.
Line Length Value Description
2 1 X Channel group
27 5 .TXIN Receiver for automatic reception printout
41 5 10110 Erase send orders
Generate active acknowledgements
Erase document if first character of reference is a figure
Generation of Archive entries
Generation of back reception send order
42 24 TLX$* Output channel for active acknowledgements
19.5.2 Service
A service with the value of telex configuration line 27 must be created.
Example: If the value of configuration line 27 is TLX$, create a service TLX.
After you have created the service for the telex channel, create a user and use the prefix of
the channel for the User ID.
19.5.3 Inbound Distribution via NN99
The NN99 file is used to distribute incoming telexes automatically.
Example:
NN99: TXIN, IN_DIST:
The inbound prefix is assumed to be .TXIN (Telex configuration line 27). If a telex is received
a send order with NUMBER=.TXIN is created. According to NN99 this number will be resolved
to IN_DIST.
19.5.4 User Profiles
Several users must be created as shown in the graphs for message flow.
19.5.4.1 User TLX9_System
The user TLX9_SYSTEM is used for messages, which are created at the host and fetched
from the MQ Server by LINK/MQ. The events for delivery and non-delivery notifications were
configured appropriately in the user profile of user TLX9_SYSTEM.