Canon EOS Rebel XTI - Manual (Page 141)

141
A/S Printing with CP Direct and BJ Direct
6
Set the trimming.
Set as necessary.
For details on trimming, see page
142.
7
Start printing.
Select [Print], then press <0>.
X The button’s blue lamp will
blink and the printing will start.
When the printing ends, the screen
will return to step 1.
To stop the printing, press <0> while
[Stop] is displayed, then select [OK]
and press <0>.
With CP Direct, the date may look light if it is imprinted on a bright
background or border.
With CP Direct, if [Multiple] is selected, [Borders] and [Date] cannot be
selected. [Borderless] will be set and [Date] will be set to [Off]. The
image will also be cut off along all four edges.
With BJ Direct, if [Bordered] is set, the date might be imprinted on the
border, depending on the printer.
With CP Direct, if you select [Stop] while printing only one picture, the
printing will not stop. If you are printing multiple pictures, the printing will
stop after the current picture is finished printing.
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor.