Canon EOS Rebel XTI - Manual (Page 135)

135
wPrinting with PictBridge
With step 4, select the item. When
is displayed as shown on the
left, press the button. You
can then set the parameters for fine
adjustments.
The parameters that can be adjusted
for the selected item are shown in the
table below.
Select the item, then press <0>.
(k: Adjustable)
Press the key to make the
adjustment, then press <0>.
Adjustment of Printing Effects
Item
Off / On / Vivid /
Natural
Natural M
B/W / Cool tone
/ Warm tone
Brightness k k k
Adjust levels – k k
k (face) Brightener
k k k
Red-eye correction k k k
Detail
set.
Contrast
–
k k
Saturation k
– Color tone k
Color balance k
After making fine adjustments for the printing effect, if you do step 4 again to
change the printing effect’s setting, the adjustments will all revert to the
default.
When [Default] is selected, the printing adjustments can not be adjusted.
[Brightness]