Hardy HI LPRE05 Shear Beams - Manual (Page 30)

HI HLPS SERIES LOAD POINT ASSEMBLY
Page 24
Step 11. Inspect the Stainless Plate for scratches or
damage. If there are scratches or damage:
• Use a box-end wrench to remove the
two hex machine screws that fasten the
stainless plate to the top plate. (See Fig.
24)
• Discard the old stainless plate.
• Place the new stainless plate so that the
thru holes are aligned with the threaded
holes in the top plate.
• Replace the two hex machine screws.
• Lower the vessel down onto the load
points.
• Reinstall the ground strap and anti-lift-
off device. (See Figs. 23 & 24)
MODEL #
Foot pounds
(NewtonMeters
or Joules)
HI HLPS1125-43B
HI HLPS1125-43F
HI HLPS1125-43S
HI HLPS2.25K-43B
HI HLPS2.25K-43F
HI HLPS2.25K-43S
HI HLPS4.5K-43B
HI HLPS4.5K-43F
HI HLPS4.5K-43S
65 (88.5)
HI HLPS11.25K-43B
HI HLPS11.25K-43F
HI HLPS11.25K-43S
295 (400)
HI HLPS22.5K-43B
HI HLPS22.2K-43F
HI HLPS22.5K-43S
515 (700)
TABLE 4: LOAD CELL BOLT TORQUE
VALUES