Hardy HI LPRE05 Shear Beams - Manual (Page 25)

OPERATION AND INSTALLATION MANUAL
Page 19
is. Use the C dimensions to determine the
proper height between the support surface
and the top of the top plate. (See Fig. 20)
Step 6. Level all the installed load point assem-
blies and make adjustments according to
the following top plate level requirements:
FIG. 20: HEIGHT DIMENSION C
Step 7. To adjust the level of the top plate, use
shim stock between the top plate and the
support bracket. (See Fig. 21)
MODEL # HEIGHT C
HI HLPS 1125, 2.25K,4.5K 3.54
(90)
HI HLPS 11.25K 4.72
(120)
HI HLPS 22.5K 6.69
(170)
TABLE 2: HEIGHT DIMENSION C