1 reboot the intercom – CyberData VoIP Intercom User Manual
Page 33
Installing the VoIP Intercom
Upgrade the Firmware and Reboot the Intercom
Operations Guide
930181B
CyberData Corporation
25
8. Enter the firmware filename of the file to be uploaded into the New Filename parameter field.
For example, kernel filename "201-image-spk-sip.bin".
9. Click Upload File.
Note
This starts the upload process. Once the Intercom has uploaded the file, the Uploading
Firmware
countdown page appears, indicating that the firmware is being written to flash.
The Intercom will automatically reboot when the upload is complete. When the countdown
finishes, the Firmware Upgrade page will refresh. The uploaded firmware filename should
be displayed in the system configuration (indicating successful upload and reboot).
10. Repeat steps
and
if you are uploading the Kernel and Application files.
For example, Application filename "201-romdisk-spk-sip.img".
shows the web page items on the Firmware Upgrade page.
2.4.1 Reboot the Intercom
To reboot a Intercom, log in to the web page as instructed in
1. Click Upgrade Firmware to open the Firmware Upgrade page (
Table 2-9. Firmware Upgrade Parameters
Web Page Item
Description
System Configuration
Shows the current configuration.
BootLoader
Shows the current boot loader filename.
Firmware
Shows the firmware for partition 1 and 2.
TFTP Server IP
Enter the TFTP Server IP address.
New Filename
Use this field to enter the new file name for the kernel or
application firmware file that you are uploading.
Click on this button to automatically upload the selected
firmware and reboot the system.
Link to the Network Setup page.
Link to the Intercom Setup page.
Link to go to the SIP Setup page.
Link to the Home page.
Click on this button to reboot the system.