CyberData VoIP Intercom - Manual (Page 26)

CyberData Corporation 930181B Operations Guide
Installing the VoIP Intercom
Configure the Intercom Parameters
18
2.3.2 Configure the Network Parameters
1. Click the Network Setup button to open the Network Setup page ( Figure 2-14 ).
Figure 2-14. Network Setup Page
2. On the Network Setup page, enter values for the parameters indicated in Table 2-6 .
Link to the SIP Setup web page.
Link to the Upgrade Firmware web page.
Table 2-5. Home Page Overview (continued)
Web Page Item Description
Table 2-6. Network Setup Parameters
Web Page Item Description
IP Addressing* Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
Table 2-6 . If you select DHCP,
go to Step 3 .
IP Address* Enter the Static IP address.