CyberData VoIP Intercom - Manual (Page 28)

CyberData Corporation 930181B Operations Guide
Installing the VoIP Intercom
Configure the Intercom Parameters
20
2.3.3 Set up the Intercom
1. Click the Intercom Setup button to open the Intercom Setup page. See Figure 2-15 .
Figure 2-15. Intercom Setup
2. On the Intercom Setup page, enter values for the parameters indicated in Table 2-7 .
Table 2-7. Intercom Setup Parameters
Web Page Item Description
Device Name Enter a descriptive name for this device (if desired).
Change Username Use this field to change the Web Access Username
Change Password Use this field to change the Web Access Password
Re-enter New Password Use this field to re-enter a new password
Speaker Volume (0 - 9) Shows the current volume level.
Microphone Gain (0 - 9) Shows the current microphone gain level.
Auxiliary Relay Allows you to enable or disable the auxiliary relay.
DTMF Relay Activation Code (3 digits) Use this field to enter the DTMF relay activation code.
Relay Activation Duration (0 - 9 seconds) Use this field to enter the relay activation duration.