FRITSCH PULVERISETTE 13 classic line - Manual (Page 13)

n Unauthorised alteration of the PULVERISETTE 13 classic line will void
Fritsch's declaration of conformity to European directives and void
the guarantee.
n Only use the PULVERISETTE 13 classic line when it is in proper
working order, as intended and in a safety- and hazard-conscious
manner adhering to the operating manual. In particular, immediately
rectify any malfunctions that could pose a safety hazard.
n If, after reading the operating manual, there are still questions or
problems, please do not hesitate to contact our specialised per-
sonnel.
2.6 Protective equipment
Protective equipment is to be used as intended and may not
be disabled or removed.
All protective equipment is to be regularly checked for
integrity and proper functioning.
The disk mill features many safety devices:
1.
The funnel (1) is protected against being reached into by a grid.
2. A safety switch (4) monitors the closing of the grinding chamber
before operation and prevents the disk mill from starting up when
the chamber is open.
3. A second safety switch (6) monitors the closing of the grinding
stock container during operation and prevents the disk mill from
starting up when the container is open.
CAUTION!
The grinding stock container and the grinding chamber are
not locked by the safety switches.
The disk mill does not start up when the grinding chamber is
open or the grinding stock container is missing. If the
grinding mill is already running when one of these occurs, it
will stop.
Safety information and use
- 13 -