List of presets (detailed) – Doepfer Pocket Dial (device no longer available) User Manual
Page 14
Page 14
Ч
Ш
Щ
Ъ
Ы
Ь
Э
Ю
Я
а
Ч
Ш
Щ
Ъ
Ы
Ь
Э
Ю
Я
а
User's Guide
with the Pocket Dial as the encoders allow a jump-free data control. The new data can be calculated
relative to the last value of the encoder in question. For Pocket Control or Pocket Fader this would not
be possible as the potentiometers transmit absolute values leading to parameter jumps when a new
preset with different assignments of the controls to MIDI messages is selected.
List of presets (detailed)
In the following you will find a more detailed list with explanations of all the presets that are shipped in
the Pocket Dial. Presets not mentioned in this manual already may be used in the Pocket Dial you
received. Please look at our web site www.doepfer.com for the current state of the factory presets.
New presets will be developed, and these will become available free on our web site too.
The name of a presets tells the coarse function of the preset. You also will find the information is the
controls are assigned to fixed MIDI channels or to the MIDI master channel of Pocket Dial.
Especially for those devices that do not recognize one of the inc/dec messages in the latest column the
term feedback is specified if the parameters of the preset (e.g. MIDI controllers) can be updated with
suitable incoming MIDI data. In this case the device controlled by Pocket Dial has to transmit the new
data after any change (e.g. if the sound of the device was changed). Please look into the manual of your
device or software controlled by Pocket Dial if this applies. If your device does not support this feature
the feedback/update will not work! If you are not sure, please contact the manufacturer of the device.
We (Doepfer) cannot give information if the device X by the manufacturer Y has this feature available.
For more details please refer to the appendix.
Example: If a knob is assigned to MIDI controller #17 on MIDI channel 5 any incoming MIDI controller
#17 data on channel 5 will be used as new starting value for this knob. The incoming controller message
updates the value for this knob.
The presets 1 ~ 64 are very similar to those of Pocket Control and Pocket Fader. Normally only the
feedback/update feature was added.