Controller properties, Preset sending and storing – Doepfer Drehbank Midi Control Box (device no longer available) User Manual
Page 21

U S E R I N T E R F A C E
22
22
22
22
Controller Properties
Most of the control functions from the libraries have variables with which you can
control Midi events e.g. Midi channel.
To change the properties of a knob click once on the
rightmouse and then on „properties“. Now you‘re going to get
what you’ve been looking for! (the properties menu,
yippee
)
☺. Here you can alter the settings of the selected control
knob with the pop up menus, e.g. Midi channel, controller
numbers. To activate the changes click on „
O.K.
or cancel to
abort.
When the Drehbank is connected correctly to the P.C editor you can then
immediately check the revised control functions.
Preset sending and storing
When you press the
" Send Preset" button you send the complete preset from the
editor to the volatile memory (RAM) of the Drehbank
.
.
.
.
With the „Store preset“
button you copy the complete preset into the non-volatile memory (EEPROM) of
the Drehbank. This takes about 82 seconds. During this eternity
☺ the L.E.D. will
blink constantly.