Doepfer Drehbank Midi Control Box (device no longer available) - Manual (Page 17)

B A S I C O P E R A T I O N S
18 18 18 18
Note:
The layout of ROM preset 1 is printed in the appendix. Information on
ROM presets 2, 3, and 4 is found in the README.TXT file.
- The Changeable non-volatile EEPROM Preset. This preset is located in the
internal non-volatile memory (EEPROM) and will under normal operating
conditions be loaded into the work buffer (RAM).
Power input/ Power supply
The Drehbank is powered by an external DC power supply. A 230V power supply
with Euro plug is included in the package. For countries with different voltages or
plug sockets you’ll have to buy the appropriate power supply in your country (9V
DC@250mA output required). On the unit there is no On/Off switch. So to turn the
unit on and off you have to connect / disconnect the power cable. Alternativly we
recommend using a multiple mains socket with an On/Off switch.