Doepfer Drehbank Midi Control Box (device no longer available) - Manual (Page 19)

B A S I C O P E R A T I O N S
20 20 20 20
Editing with the Editor software
The basic concepts of editing with the editor software are based upon the "Drag &
Drop" principle. In "Control Copy" mode you can „drag“ a controller and „drop“
on the chosen control knob; you use the „drag and drop“ also when working with
the library. In „Control Exchange“ mode you can exchange the controllers. To
switch between the modes press the following symbols.
--->+ for "Control Copy" mode.
<---> for "Control Exchange" mode.
If you „drop“ something unintentionally, DON’T PANIC, there is a seperate undo
function for each bank.
Every step you make will be sent straight to the Drehbank so that you can check
every function right away.
You can „Drag“ and „Drop“ from bank to bank. First: click once on the bank
symbol „Drag“ and then select the bank with the arrow keys, Then click on „Drop“
in the selected position.
If you click with the rightmouse above a control, you’ll go into the „Properties
Dialogue“. Here you can change various parameters of the control knob functions.
If you‘re big into Midi then with a doubleclick of the leftmouse you can access the
edit control dialogue. Here you can also create SysEx strings.
Warning
If you don’t have the “Know How“ you should leave Edit Control Dialogue
alone!
The GM_LIB.DBP file includes the complete control functions of the General Midi
Standard.