Cisco SERIES 7970 - Manual (Page 24)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-24
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
QoS Configuration Menu
The QoS Configuration menu displays information that relates to quality of
service (QoS) for the phone.
Table 4-11 describes the options on this menu.
Related Topics
• Displaying a Configuration Menu, page 4-2
• Network Configuration Menu, page 4-7
Network Configuration
The Network Configuration menu contains the Load Server option. The Load
Server option is used to optimize installation time for phone firmware upgrades.
You can set the Load Server to another TFTP server IP address or name (other
than the TFTP Server 1 or TFTP Server 2) from which the phone firmware can be
retrieved for upgrades on the phones. When the Load Server option is set, the
phone contacts the designated server for the firmware upgrade.
Security Mode Displays the security mode that is set
for the phone. Use Cisco Unified CallManager
Administration to modify.
Logging Display For use by the Cisco Technical Assistance Center (TAC), if necessary.
Table 4-10 Security Configuration Menu Options (continued)
Option Description To Change
Table 4-11 QoS Configuration Menu Options
Option Description To Change
DSCP For Call
Control Differentiated Services Code Point
(DSCP) IP classification for call
control signaling. Use Cisco Unified CallManager
Administration to modify.
DSCP For
Configuration DSCP IP classification for any phone
configuration transfer. Use Cisco Unified CallManager
Administration to modify.
DSCP For
Services DSCP IP classification for phone-based
services. Use Cisco Unified CallManager
Administration to modify.