Cisco SERIES 7970 - Manual (Page 2)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Configuration Menus on the Cisco Unified IP Phone 7970 Series
4-2
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
Before you can change option settings on the Network Configuration menu, you
must unlock options for editing. See the
“Unlocking and Locking Options”
section on page 4-3 for instructions.
For information about the keys you can use to edit or change option settings, see
the
“Editing Values” section on page 4-4 .
You can control whether a phone user has access to phone settings by using the
Settings Access field in the Cisco Unified CallManager Administration Phone
Configuration Settings page. See Cisco Unified CallManager Administration
Guide for more information.
Related Topics
• Unlocking and Locking Options, page 4-3
• Editing Values, page 4-4
• Overview of Options Configurable from a Phone, page 4-5
• Network Configuration Menu, page 4-7
• Device Configuration Menu, page 4-15
Displaying a Configuration Menu
To display a configuration menu, perform the following steps.
Note You can control whether a phone has access to the Settings menu or to options on
this menu by using the Settings Access field in the Cisco Unified CallManager
Administration Phone Configuration page. The Settings Access field accepts
these values:
• Enabled—Allows access to the Settings menu.
• Disabled—Prevents access to the Settings menu.
• Restricted—Allows access to the User Preferences menu and allows volume
changes to be saved. Prevents access to other options on the Settings menu.
If you cannot access an option on the Settings menu, check the Settings Access
field. For more information, see Cisco Unified CallManager Administration
Guide.