Cisco SERIES 7970 - Manual (Page 10)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Network Configuration Menu
4-10
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
TFTP Server 2 Optional backup TFTP server that
the phone uses if the primary TFTP
server is unavailable.
If neither the primary TFTP server
nor the backup TFTP server is
listed in the CTL file on the phone,
you must unlock the CTL file
before you can save changes to the
TFTP Server 2 option. In this case,
the phone will delete the CTL file
when you save changes to the
TFTP Server 2 option.
For information about the CTL file,
refer to Cisco Unified
CallManager Security Guide. For
information about unlocking the
CTL file, see to the
“Security
Configuration Menu” section on
page 7-2
.
1. Unlock the CTL file, if necessary.
2. Unlock network configuration options.
3. Enter an IP address for the TFTP Server 1
option.
4. Scroll to the TFTP Server 2 option, press
the Edit softkey, and then enter a new
backup TFTP server IP address.
5. Press the Validate softkey, and then press
the Save softkey.
Default Router 1
Default Router 2
Default Router 3
Default Router 4
Default Router 5
Default router used by the phone
(Default Router 1) and optional
backup routers (Default Router
2–5). 1. Unlock network configuration options.
2. Set the DHCP Enabled option to No.
3. Scroll to the appropriate Default Router
option, press the Edit softkey, and then
enter a new router IP address.
4. Press the Validate softkey.
5. Repeat Steps 3 and 4 as needed to assign
backup routers.
6. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change