Cisco SERIES 7970 - Manual (Page 22)

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-22
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8148-01
Ethernet Configuration Menu
The Ethernet Configuration menu includes the Span to PC Port option. This
option indicates whether the phone will forward packets transmitted and received
on the network port to the access port.
Enable this option if an application that requires monitoring of the phone’s traffic
is being run on the access port. These applications include monitoring and
recording applications (common in call center environments) and network packet
capture tools that are used for diagnostic purposes.
To modify this option, use Cisco Unified CallManager Administration.
Security Configuration Menu
The Security Configuration menu displays settings that relate to security for
phone.
You can view additional security information and unlock the CTL file from the
Security Configuration screen on a phone. For more information, see the
“Security Configuration Menu” section on page 7-2 .
Table 4-10 describes the options on the Security Configuration menu.
Display Idle
Timeout Length of time that the phone is idle
before the display turns off. Applies
only when the display was off as
scheduled and was turned on by an
end-user (by pressing a button on the
phone, touching the touchscreen, or
lifting the handset). Use Cisco Unified CallManager
Administration to modify.
Days Display Not
Active Days that the display does not turn on
automatically at the time specified in
the Display On Time option. Use Cisco Unified CallManager
Administration to modify.
Table 4-9 Power Save Configuration Menu Options (continued)
Option Description To Change