COP-USA CD55-SDI-IRWPTK - Manual (Page 29)

28
IDLE
IDLE setting means if there is no command for the dome for a period of
time, the dome will run the actions as defined.
1) TIME: Move the cursor to “TIME” and press IRIS OPEN to enter, and
move the joystick up and dome to select among 30 sec, 1 min, 5
min, 10 min and 30 min. And press IRIS OPEN to confirm.
2) ACTION: Move the cursor to “ACTION” and press IRIS OPEN to enter.
Move the joystick to select the actions including” NONE, PRESET,
SCAN, SEQUENCE, PATTERN. Press IRIS OPEN to confirm.