ChemoMetec NC-3000 - Manual (Page 35)

6 NucleoView NC- 3000™
991-3001 Rev. 1.3 June-2013 19
6 NucleoView NC-3000
™
Figure 11 NucleoView NC- 3000™ software with a typical result
The NucleoView NC- 3000™ software is used for control of the NucleoCounter ®
NC-
3000™ instrument and image analysis of the recorded images. The program is
installed on a Windows PC (W indows XP SP3, Windows 7 or W indows 8).
Several options for data presentation are available in the NucleoVie w NC- 3000™
software. Histograms, Scatter plots etc.
A USB Flash drive supplied with the instrument contains the software, drivers,
instrument specific data etc. On the same USB Flash drive you can also find the
NucleoView NC- 3000™ User’s Guide. Run the file “Install Guide” and follow the
directions in the Software User’s Guide. Once the program is installed you can open
the Software User ’s Guide from the help menu.