Customer, Customer customer support support support support, Sales and ordering information – ChemoMetec SCC-100 User Manual

Page 5: Disclaimer notices, Copyright notices

iii

Customer

Customer support

support

If you have questions about installing or using your SomaticView

software check this user's guide first - you

will find answers to most of your questions here. If you need further assistance, please contact customer
support at ChemoMetec A/S.

Contacting support

Technical information including product literature, answers to questions regarding the operation of the
NucleoCounter

SCC-100™, which are not covered in this document and information on software upgrade, are

available through the following:

•

For Email support, send questions to NucleoCounter Technical Support on the address
[email protected]

[email protected]

•

For Technical Support , call (+45) 48 13 10 20.

Please note the NucleoCounter

SCC-100™ serial number and have it available when contacting ChemoMetec

A/S for support. The NucleoCounter

SCC-100™ serial number is found on a label affixed to the bottom of the

instrument and in the display upon start-up.

Sales and ordering information

For pre-sales assistance with NucleoCounter

SCC-100™ or the SomaticView™ software, to place an order for a

NucleoCounter

SCC-100™ or consumables, call (+45) 48 13 10 20 fax (+45) 48 13 10 21, or mail to

[email protected]

Disclaimer Notices

The material in this document is for information only and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to assure its accuracy, ChemoMetec A/S assumes
no liability resulting from errors or omissions in this document, or from the use of the information contained
herein.

ChemoMetec A/S reserves the right to make changes in the product design without reservation and without
notification to its users.

Copyright © ChemoMetec A/S 2003. All rights reserved. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
recording or otherwise, without the prior written consent of ChemoMetec A/S, Gydevang 43, DK-3450 Allerød,
Denmark.

ChemoMetec, NucleoCounter are registered trademarks owned by ChemoMetec A/S. NucleoCounter SCC-100,
SP1-Cassette and SomaticView are trademarks of ChemoMetec A/S. LabVIEW

™

is a trademark of National

Instruments Corporation. Windows, Excel and Word are trademarks of Microsoft Corporation.

All other trademarks are the property of their respective owners.