ChemoMetec SCC-100 - Manual (Page 32)

5 Utility tab
22
Either WordPad or Notepad 3 can be configured as text editors. Therefore, if it is
not possible to locate “wordpad.exe”, then:
a. Select Cancel from Figure 28, press OK when the message box "Printing
Report" appears.
b. Then select Notepad from the text editor list box and press the Print
button again.
Figure Figure Figure Figure 28 28 28 28 This dialogue appears when WordPad is configured as text editor.
5.4.1 Define font for WordPad
To create reports with results in columns the font for the text editor must be defined.
This is done differently for WordPad and Notepad. Follow the directions below to define
a font for WordPad.
1. Open WordPad and select “Save as” from the File menu. The dialogue shown in
figure 29 appears.
3 Before Notepad can be selected as text editor the field “Files of type:” must be
changed to “All files (*.*)”.