Checkline BLH User Manual
Page 7

Checkline-Europe
-10-
8.0
PRINT SAVED DATA
 
 
To print your saved data, connect the device to the 
printer using the printer cable that was delivered with 
your device. Carefully loose the protection cap on the 
humimeter BLH. At first plug in the side of the connector 
with the close plastic casing at the humimeter BLH. 
Then switch on the device. 
 
Not till then the other side of the cable has to be plugged 
in at the printer. Switch on the printer by pressing
.
Now the green LED is blinking. If it does not blink, 
please change the batteries and try again. 
 
Press the
button at your humimeter until you reach
the menu (see image on the right). Choose „Print Logs“
and confirm by pressing
.
Now you can select if you want to print the last saved 
measuring series or all saved measuring series (logs). 
 
Confirm by pressing
again. The selected logs are
printed out now. 
 
To save paper, please think of clearing the data storage 
regularly. 
 
 
 
 
 
 
 
 
 
9.0 
ONLINE PRINT AND ONLINE SEND
 
Your device supports the function “Online Print” and 
“Online Send”, this can be activated in the menu 
„Options“. If an option is active, every newly recorded log 
will immediately be printed or transferred to the PC after 
pressing
key.
Checkline-Europe
-7-
5.0
MENU LEVEL OVERVIEW
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Watch the saved data (logs) 
Save new value (log) 
Power off (3 sec.) 
Next calibration curve 
Previous calibration curve 
Start measurement 
Store menu
Type selection menu
Main menu
Switch upper 
Switch lower 
Open this menu / Enter 
Keypad symbols 
 
Measuring window: 
Rolling Menu
Power ON / OFF
Switch upper
Switch lower
Save
Hold
Watch the
saved data
Suppliers data
can be added
Rotate display
 
Menu: 
Enter
Switch upper
Switch lower
Exit
Enter numbers
Enter letters
Next or right
Left
Yes
No
Shift
OK
Edit Logs
Manual Logs
Clear Logs
Print Logs
Last Log
All Logs
Clear Logs
Send Logs
Manual Logs
Clear Logs
Options
Status
Options 
 
Date / Time
Log Time
Language
Unlock
°C / °F
o Userlevel
BL On Time
Auto Off Time
Materialcalib.
o Online Send
o Online Print
Password
Reset
Overview main menu
