Checkline CAP-TA - Manual (Page 5)

User’s Guide
CONTROLS
POWER / ENTER
Turns power on and off. Also used to se-
lect configuration menu items.
PEAK / ADVANCE
Used to switch between Clockwise Peak,
Counterclockwise Peak and Normal (real
time) display modes. The actual peak
readings are always captured and can be
recalled at any time by pressing this but-
ton. Also used to step through configura-
tion menu items.
ZERO
Zeros any tare value (up to the full capac-
ity of the gauge) and clears the peak read-
ings stored in memory.
DATA
Used to output the torque data point currently displayed.
UNITS
Changes measurement units between lbin, Ncm, and kgmm.
DISPLAY
The display consists of a 4 1/2-digit section and several indicators. Their func-
tions are listed below.
LO BAT
Low battery voltage indicator
CW
Clockwise torque indicator
CCW
Counterclockwise torque indicator
CW PEAK
Peak clockwise torque indicator
CCW PEAK
Peak counterclockwise torque indicator
LBIN, NCM, KGMM
Units of measurement
- - - - (dashes) Overload (>110% of range)
Reduce torque immediately
3