Cannon Instrument miniAV-LT - Manual (Page 77)

73
CANNON ® miniAV-LT Low Temperature Automatic Viscometer with VISCPRO ® Instruction & Operation Manual
Version 1.a— May, 2009; CANNON ® Instrument Company
2139 High Tech Road • State College, PA 16803 • USA
CHAPTER
5
OPERATING, MAINTAINING
AND SERVICING THE miniAV-LT
This chapter of the miniAV-LT Instruction & Operation Manual contains
information regarding the operation, service and maintenance of the
miniAV-LT instrument. For additional information on required utilities,
instrument installation and setup, refer to Chapter 1.
miniAV-LT components
The standard miniAV-LT installation includes these primary components:
Bath unit Waste Receiver Power supply AWHE
NOTE The installation also requires user-supplied solvent vessels. CANNON
supplies two G-38 reagent bottle caps (for recommended solvent ves-
sels). The user must ensure solvent compatibility for dual solvent sys-
tems, since solvent residue will mix in the system. Additionally, any new
solvents should be compatible with previously-used solvents, since
residue from original solvents may remain in the solvent lines and/or
Waste Receiver.
Bath Unit
The Bath Unit houses the primary control and operating systems for the
miniAV-LT, including modular service components, temperature bath
with viscometer tube, sample vial holder, and related hardware.