BUCHI KjelDigester K-449 - Manual (Page 31)

5 – 31 Operation Manual KjelDigester K-446/K-449
5 Installation
5.5.4 Adjust the temperature offset
a Preliminary tasks
1. 5.5.1 Accessing the settings menu, (5–29).
b Tasks
1. Press a [STOP] until the offset menu appears.
2. Set the temperature offset to the desired value by pressing b [+/-].
∙The offset value can be measured with a additional temperature sensor.
3. Press c [ENTER] to confirm the new value.
5.5.5 Set the clock (K-449 only)
a Preliminary tasks
1. 5.5.1 Accessing the settings menu, (5–29).
b Tasks
1. Press a [STOP] until the clock menu appears.
2. Adjust the hours by pressing b [+/-].
3. Press c [ENTER] to confirm the new value.
4. Adjust the minutes by pressing b [+/-].
5. Press c [ENTER] to confirm the new value.
5.5.6 Adjust the Scrubber control (K-449 only)
a Preliminary tasks
1. 5.5.1 Accessing the settings menu, (5–29).
1
2
CLOCK 13:04
3