BUCHI KjelDigester K-449 - Manual (Page 27)

5 – 27 Operation Manual KjelDigester K-446/K-449
5 Installation
2. Place the drip tray a in the drip tray holder b.
5.4.2 Suction module, installation
1. Hold the suction module on both handles a and place it on the rack support c.
∙Make sure both hinge bolts b are located in the notches of the rack support.
NOTE
The magnets d on the rack support will hold the suction module in the open position.
5.4.3 Scrubber/water jet pump, connection
a Preliminary tasks
1. Place the Scrubber next to the KjelDigester on the left side.