Aviom AV-M8 - Manual (Page 45)

37 Av-M8 M
ic
i
nput
M
odule
u
ser
G
uide
16 Channels Send and Return
The 16 x 16 configuration has 16 inputs and 16 outputs on each side of the
audio network.
A-Net
A-Net Expansion
Pro16 Output
Pro16 Input Pro16 Output
Pro16 Input
Channels 1-16 In Channels 1-16 Out
Channels 17-32 In Channels 17-32 Out
Using this configuration, each side of the audio network has one input
module (or pair of AV‑M8 units) and one Pro16 output module. Sixteen
channels of audio move in each direction over a single Cat‑5e cable.
Again, the A‑Net Expansion port is used to combine the A‑Net data from two
devices for transmission over one Cat‑5e cable.
Channels 1-16
Channels 17-32
EXPANSION OUT
EXPANSION OUT
To configure a 16 x 16 system:
Set up one input module (AV‑M8, pair of AV‑M8s, Y1 card, 1.
AN‑16/i or AN‑16/i‑M) and one output module on each side
of the network.
Connect 16 mic‑ or line‑level audio sources to inputs 1‑16
2.
on the first Pro16 Series input module.
Connect a Cat‑5e cable from the
3. a-N
et
o
ut
port on the
first input module to the a-N
et
e
xpaNSIoN
port on the first
output module.